Sling 4 Tail Harness
This Harness is intended for those who will be installing one of our systems into their Sling. Not intended for Quickbuild kits unless built by one of our Preferred Build Centers.
Sling 4 tail wire harness. This harness will include the wiring for the magnetometer, trim and beacon light for use with a Midwest Panel Builders package. This harness will include the mating connector with main harness, wires and magnetometer wire as well as the Garmin magnetometer connector. Simply run the harness in the fuselage before putting the skin on and place the mating connector just in front of the front baggage compartment on the tail section and run the wires up the left side.
NOTE: The wires for the trim and beacon will be longer than needed, simply tuck excess wire into the tail until you are ready to cut to size. A Handling Charge of $5.50 will be applied to insure the shipment.
*Image may not represent actual product